PopSockets MagSafe Low-Pro Grip - A 2.6mm Grip That Folds Out into an Adjustable Stand

PopSockets, the company that invented the phone grip, has erased two of its own weak points at once. There's no adhesive — it attaches and detaches magnetically — and the thickness is down to 2.6mm. On top of that, there's a metal stand that holds any angle you set.

---

📊 Quick Info

Item	Details
Brand	PopSockets (USA)
Price	₩60,200 (official store, black)
Size / Weight	60 × 59 × 2.6mm folded · about 15mm expanded · 20g
Materials	Aircraft-grade aluminum base · high-strength stainless steel stand · two N52 magnets
Magnet pull	30 lb straight · 25 lb angled (manufacturer nominal)
Durability	100,000+ grip cycles · 5,000+ stand cycles
Wireless charging	5–12W through the grip with verified chargers (the company still recommends removing it)
In one line	⭐⭐⭐⭐☆ The thinnest answer from the brand that created the category

---

✨ Three-Line Summary

• 👍 Best part: 2.6mm folded, yet it holds any angle you want in portrait or landscape
• 👎 Downside: Expensive at ₩60,000, and it assumes a MagSafe or Qi2 case
• 🎯 Who it's for: Anyone who wants a grip but was put off by how thick the usual ones are

---

📸 A Closer Look

Expanded, you can see the radial expansion layer inside. The outer ring is aluminum

The side view when folded. At 2.6mm it's practically a plate from this angle

It lands right on the MagSafe ring. With no adhesive, you can reposition it whenever

Press the edge of the center button and slide it, and it rises. That's where your finger goes

Lift the stainless ring and rotate it and you have a stand. The angle isn't stepped — it's continuous

The same ring handles landscape. This is the position for watching video

It comes off as one piece. For wireless charging or a case swap, you just pull it off

---

🔍 Why It Caught My Eye

It doesn't give up adhesive-free or thinness

There are plenty of magnetic grips and plenty of thin ones, but doing both while also fitting a stand inside is rare. At 2.6mm and 20g folded — about the thickness of a case — it barely catches on a pocket.

Continuous angles, not fixed steps

Most folding stands give you one or two preset angles. Here you lift the metal ring and rotate it, so it stops wherever you want in both portrait and landscape. That matters at an awkward desk height or on an airplane tray.

They published the numbers

Two N52 magnets, 30 lb straight and 25 lb angled hold, 100,000 grip cycles and 5,000 stand cycles. Few products in this category state specs at this level, which makes it a useful baseline for comparison.

They spelled out when charging works

The page says 5–12W passes through with verified chargers, and lists the chargers and power banks that don't qualify. Not fudging it into a simple yes or no builds some trust.

---

🤔 Points to Consider

Price

₩60,200 is high for a grip accessory. The MagSafe grips commonly sold in Korea run ₩10,000–20,000, and PopSockets' own standard MagSafe PopGrip is ₩45,100. Whether thickness, the stand, and the finish are worth two to three times that is the real question.

It assumes a MagSafe or Qi2 case

You need a case the magnet can hold onto. With an ordinary case, half the appeal disappears.

Charging is conditional

The company itself says to remove it for best performance, and classes the iPhone Air battery and some Anker and Belkin power banks as "always remove to charge." If you live on a charging pad, check first.

Stock

The black model on the official store is listed as pre-order and backorder, limited to one per order. Getting it right away may not be possible.

Where to buy

Korean marketplaces carry it as a parallel import at around ₩93,000 — roughly 1.5x the ₩60,200 official price. If you're not in a hurry, waiting for the official store or a Korean official storefront is cheaper.

---

📋 Product Traits (Subjective)

• Design: ⭐⭐⭐⭐⭐
• Portability: ⭐⭐⭐⭐⭐
• Practicality: ⭐⭐⭐⭐⭐
• Value: ⭐⭐⭐☆☆

---

🛒 Before You Buy

✅ Recommended if you

• Already use a MagSafe or Qi2 case
• Spend a lot of time with your phone propped up (continuous angle adjustment)
• Have peeled off a grip before because it was too thick

❌ Not for you if you

• Use an ordinary case and don't want to stick on an adapter ring
• Leave your phone on a charging pad much of the day
• Aren't willing to spend ₩60,000 on a grip

---

🎯 Final Verdict

This is the answer from the company that invented phone grips to the demand for "thin, and removable." It fits a continuously adjustable portrait-and-landscape stand into 2.6mm and 20g, and publishes hold strength, durability, and charging conditions as numbers.

The one real obstacle is that it costs two to three times what local alternatives do. If you prop your phone up often and care about thickness, it should earn its price; if you just need something that keeps the phone from slipping, it's more than you need.

---

Source: PopSockets official store, MagSafe Low-Pro Grip & Stand page